Keywords: auxiliary hydraulic kits for excavators, excavator auxiliary hydraulic kits
auxiliary hydraulic kits for excavators
Excavators are widely used on a lot of possible applications: from construction sites (for removing material, dig trenches, holes and foundations) to demolition ones (for pulling down buildings and constructions), without forgetting mining sites (to dig, lift or move material around), forestry works (move felled trees) or Oil & Gas sites.
At the heart of an excavator is its hydraulic system; almost every part of an excavator is in fact linked to its hydraulic system. For instance, the excavator’s diesel engine is connected to the hydraulic pump, which supplies flow and pressure to the various functions of the machine. As the pump works, oil moves throughout the system, allowing the excavator’s tracks, boom, arm and bucket to work.
excavator auxiliary hydraulic kits
Behind excavators versatility is their capability of featuring dozens of different hydraulic attachments; hence it’s not unusual that operators need to install on the machine arm additional auxiliary hydraulics for running other hydraulic implements like thumbs, grapples, breakers, or buckets with tilt option. This article provides some useful tips for this kind of operation.
Preparing for the Installation of Auxiliary Hydraulics
To plumb in additional auxiliary hydraulics it’s often necessary to operate on both sides of the excavator stick, where high pressure lines are used to power specific attachments (like hammers or compactors) while the function of medium pressure lines is to rotate or tilt them.
Here’s a list of suggested precautions and recommended safety measures:
- before taking any fitting yet installed off the stick, the hydraulic attachment must be lowered first, to prevent it from suddenly dropping down.
- A basin will be helpful to collect oil spilled out.
- It’s better to think in advance of a proper route for the hoses to avoid damaging themwhen the excavator is at work: an incorrect route could in fact lead to hose-bucket mutual rubbing or to hoses pinched or ripped off by tree limbs.
- Before starting the installation, operators should care to collect all the necessary hydraulic parts (ball valves, elbows, fittings) and to verify that each one has the right thread.
- Size of hoses and fittings installed must suit the attachment flow rate (be it high-flow or standard-flow, depending on the excavator model) to avoid unnecessary losses of pressure and energy caused by overheating or turbulent flow.
Guide to Installing Auxiliary Hydraulics
Typically, the installation process entails cutting one or more lines temporarily and adding 3-way valves to the hydraulic circuit with auxiliary hydraulics fitted. This allows the hoses of the hydraulic attachments to be hooked up to the excavator whenever it’s required.
One attachment at a time can be powered by adjusting the ball valve in one direction or another (for example, depending on the ball valve’s position, pressing the joystick will pressurize a thumb or tilt a bucket).
Different Types of Excavator Hydraulic Equipment
Types of Excavator Attachments
- Hydraulic Hammer
- Hydraulic Magnet
- Hydraulic PUlverizer
- Hydraulic Shear